Getting Started

1. Remove all packaging and confirm all parts are included.
2. Hand wash key components (water tank, milk reservoir, portafilter, baskets, filter basket, carafe, etc.), then rinse and dry.
3. Fill the water tank and install it into the back of the unit.
4. Place components in their correct positions:
• Filter holder (top right)
• Carafe below the brew area
• Portafilter (left side)
• Milk reservoir (center slot)
5. (Optional) Set the clock by pressing Clock Set and adjusting with the +/– buttons.

TIP: Run a quick water-only brew cycle (aka Priming) before first use to flush and preheat the system.